FAST FireWire Cut-to-Fit Wire Sets deliver a high performance, convenient solution for LS coil-equipped engines that require custom length plug wires for a clean installation. Known for their high output, durability and small footprint, GM LS ignition coils are a popular ignition system enhancement for many performance applications. However, retrofitting GM LS coils often results in the use of too short or excessively long spark plug wires to complete the installation. FAST has solved this problem by developing two Cut-to-Fit Wire Sets for GM LS ignition coils.FAST pre-assembles the ignition coil terminals, requiring the end user to crimp only the spark plug terminals to the wires. Designed to accommodate custom coil mounting locations, FAST Cut-to-Fit Wire Sets are available with either 90 degree or 135 (45) degree spark plug boots.With a 9mm diameter and only 15 ohms per foot resistance, FAST FireWire delivers the most energy possible to the spark plug. FireWire's proprietary reactive core suppresses electromagnetic interference (EMI), safeguarding noise-sensitive ignition control and EFI systems. FAST engineers built the Cut-to-Fit Wire Set to withstand the high heat from turbo LS engines. Featuring a silicone-on-silicone construction, FireWire is resistant to abrasion, heat and oils, while silicone spark plug boots resist cracking from hot headers. Additionally, FAST engineers equipped the FireWire Cut-to-Fit Wire Set with our exclusive Heat Sleeve protective sleeve. Produced from braided fiberglass, the Heat Sleeve-equipped FireWire will withstand up to 1,200 degrees Fahrenheit.
- Heat Sleeve is able to withstand up to 1,200 degree fahrenheit.
- Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. 'Proven performance' is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quality. Edelbrock core products are engineered, manufactured, and tested in the USA to ensure the best quality possible. This is further backed by some of the best warranties in the industry and a highly qualified technical support staff.
- Low resistance means more spark energy reaches the spark plugs
- Braided fiberglass sleeve provides an extra level of protection against heat.
- Extreme suppression capabilities prevent electronic interference
- Heat Sleeve protects wires up to 1,200 degrees Fahrenheit
- Available in custom, universal and sets with heat sleeve installed
- Extreme suppression capabilities prevent electronic interference
- Extra-long cut-to-fit wires with pre-terminated coil terminals allow for a clean custom installation.
- Silicone plug boots handle 550°F for long life
- Silicone boots resist cracking in high heat environment.
- Extra-long cut-to-fit wires with pre-terminated coil terminals allow for a clean custom installation.
- Available in custom, universal and sets with heat sleeve installed
- Heat shrink secures Heat Sleeve at boots.
- Heat shrink secures Heat Sleeve at boots.
- 9mm core delivers the highest possible energy to the spark plug
- Heat Sleeve protects wires up to 1,200 degrees Fahrenheit
- Available in custom, universal and sets with heat sleeve installed
- Braided fiberglass sleeve provides an extra level of protection against heat.
- Low resistance means more spark energy reaches the spark plugs
- Extreme suppression capabilities prevent electronic interference
- 9mm core delivers the highest possible energy to the spark plug
- Heat Sleeve is able to withstand up to 1,200 degree fahrenheit.
- Available in custom, universal and sets with heat sleeve installed
- Braided fiberglass sleeve provides an extra level of protection against heat.
- Heat Sleeve protects wires up to 1,200 degrees Fahrenheit
- Silicone plug boots handle 550°F for long life
- Braided fiberglass sleeve provides an extra level of protection against heat.
- Heat shrink secures Heat Sleeve at boots.
- Silicone boots resist cracking in high heat environment.
- Silicone-on-silicone sleeve construction resists high temperatures and abrasion
- Low resistance means more spark energy reaches the spark plugs
- Silicone-on-silicone sleeve construction resists high temperatures and abrasion
- Reactive core reduces EMI interference
- Heat Sleeve is able to withstand up to 1,200 degree fahrenheit.
- Low resistance means more spark energy reaches the spark plugs
- Silicone boots resist cracking in high heat environment.
- Heat shrink secures Heat Sleeve at boots.
- Extra-long cut-to-fit wires with pre-terminated coil terminals allow for a clean custom installation.
- Heat Sleeve protects wires up to 1,200 degrees Fahrenheit
- Extreme suppression capabilities prevent electronic interference
- Reactive core reduces EMI interference
- Silicone boots resist cracking in high heat environment.
- Braided fiberglass sleeve provides an extra level of protection against heat.
- Available in custom, universal and sets with heat sleeve installed
- 9mm core delivers the highest possible energy to the spark plug
- The lowest resistance wire available with only 25 ohms per foot
- Silicone plug boots handle 550°F for long life
- Reactive core reduces EMI interference
- Extra-long cut-to-fit wires with pre-terminated coil terminals allow for a clean custom installation.
- Heat shrink secures Heat Sleeve at boots.
- Heat Sleeve is able to withstand up to 1,200 degree fahrenheit.
- 9mm core delivers the highest possible energy to the spark plug
- Silicone boots resist cracking in high heat environment.
- Silicone-on-silicone sleeve construction resists high temperatures and abrasion
- Heat Sleeve protects wires up to 1,200 degrees Fahrenheit
- Silicone plug boots handle 550°F for long life
- The lowest resistance wire available with only 25 ohms per foot
- 9mm core delivers the highest possible energy to the spark plug
- Heat Sleeve is able to withstand up to 1,200 degree fahrenheit.
- Silicone-on-silicone sleeve construction resists high temperatures and abrasion
- Extreme suppression capabilities prevent electronic interference
- Extra-long cut-to-fit wires with pre-terminated coil terminals allow for a clean custom installation.
- Silicone boots resist cracking in high heat environment.
- Silicone-on-silicone sleeve construction resists high temperatures and abrasion
- Heat Sleeve is able to withstand up to 1,200 degree fahrenheit.
- Low resistance means more spark energy reaches the spark plugs
- Available in custom, universal and sets with heat sleeve installed
- 9mm core delivers the highest possible energy to the spark plug
- Braided fiberglass sleeve provides an extra level of protection against heat.
- Silicone plug boots handle 550°F for long life
- Silicone-on-silicone sleeve construction resists high temperatures and abrasion
- Extreme suppression capabilities prevent electronic interference
- Reactive core reduces EMI interference
